Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Copper Core Power Cable

1.Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Power Cable  Description
0.6/1KV XLPE insulated power cable
(1)Production capacity:2000km/month
(2)MOQ:1km
(3)Delivery:10~15 officail days.
(4)Standards:IEC,ASTM,DIN,BS; or according to customers' requirements.

2.Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Power Cable Specification
1.) Conductors: copper or aluminum.
2.)Both armored and non-armored type power cables are available.
3.)Voltage rating: 0.6/1kV
4.)PVC or XLPE sheathed.
5.)Number of cable cores: one core (Single core),two cores(Double cores),three cores, four cores (Four Equal-section-area cores or three equal-section area cores and one smaller section area neutral core), five cores (Five equal area cores or three equal-section-area cores and two smaller section area neutral cores).
 6.)Standards: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.

3.Number of Cores & Nominal Cross-section Area

4.Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Power Cable Installation:
1. )The installation temperature should not over 20ºC, If the ambient temperature is lower than 0ºC, the cable should be preheated.
2.) The bending radius of cable should not less than 8 times.
3. )After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.
 

5.In air:
1.)  As the single core cable laying in parallel, the distance between the cable's center is 2 times (for cables which cross section area of conductor ≤185mm2) and
90mm (for cables which cross sectional area of conductor≥240mm2)
2.) Ambient temperature: 30ºC
3.) Max. temperature of conductor: 70ºC
4.)Rating factors of current rating for ambient temperature:
6.Direct in ground:
1.)  When the single core cables are installed separately, the distance between the cable's center is 2 times of the cable diameter.
2.)  Ambient temperature: 25ºC.
3.)  Max. temperature of conductor: 70ºC.
4.)  Soil thermour resistivity: 1.0ºC. m/w.
5. ) Depth: 0.7m
6. ) Rating factors under different ambient temp.:
7. XLPE Insulated electric cable Description









1.Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Power Cable  Description
0.6/1KV XLPE insulated power cable
(1)Production capacity:2000km/month
(2)MOQ:1km
(3)Delivery:10~15 officail days.
(4)Standards:IEC,ASTM,DIN,BS; or according to customers' requirements.

2.Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Power Cable Specification
1.) Conductors: copper or aluminum.
2.)Both armored and non-armored type power cables are available.
3.)Voltage rating: 0.6/1kV
4.)PVC or XLPE sheathed.
5.)Number of cable cores: one core (Single core),two cores(Double cores),three cores, four cores (Four Equal-section-area cores or three equal-section area cores and one smaller section area neutral core), five cores (Five equal area cores or three equal-section-area cores and two smaller section area neutral cores).
 6.)Standards: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.

3.Number of Cores & Nominal Cross-section Area

4.Copper Conductor XLPE Insulated PVC Sheathed Armored Electric Power Cable Installation:
1. )The installation temperature should not over 20ºC, If the ambient temperature is lower than 0ºC, the cable should be preheated.
2.) The bending radius of cable should not less than 8 times.
3. )After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.
 

5.In air:
1.)  As the single core cable laying in parallel, the distance between the cable's center is 2 times (for cables which cross section area of conductor ≤185mm2) and
90mm (for cables which cross sectional area of conductor≥240mm2)
2.) Ambient temperature: 30ºC
3.) Max. temperature of conductor: 70ºC
4.)Rating factors of current rating for ambient temperature:
6.Direct in ground:
1.)  When the single core cables are installed separately, the distance between the cable's center is 2 times of the cable diameter.
2.)  Ambient temperature: 25ºC.
3.)  Max. temperature of conductor: 70ºC.
4.)  Soil thermour resistivity: 1.0ºC. m/w.
5. ) Depth: 0.7m
6. ) Rating factors under different ambient temp.:
7. XLPE Insulated electric cable Description

0.8mm Male Header

0.8mm Pin Header

Antenk 0.8mm Pitch Male Header series is a fine pitch, low profile, single/dual/three/four row, PCB mounted connector set intended for limited space applications or where total weight is a factor. Our specially tooled insulators and contacts maintain consistent high quality through our automated production processes. Each series is available in thru-hole PCB or SMT mounting and plated tin, gold or selective gold as specified.

0.8mm Pin Header Options

Number of Rows
1/Single
2/Double
3/Three
4/Quad

Number of Positions
2 Position
3 Position
4 Position
5 Position
6 Position
8 Position
10 Position
12 Position
14 Position
15 Position
16 Position
17 Position
20 Position

Termination Style
SMD/SMT
Through Hole

Mounting Angle
Right Angle
Straight

0.8mm Pin Header Specifications:

Material: Standard Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Plating:
U = Gold over nickel underplate
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall.
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
Temperature Ratings: Operating temperature: -40°C to +105°C
Max process temp: 230°C for 30 ~ 60 seconds (260°C for 10 seconds)
Soldering process temperature: 260°C

Packaging:
Anti-ESD plastic bags or tubes

Approvals and Certifications:
UL Recognized File no. E224053

Pin Header,0.8Mm Male Header,0.8Mm Pin Header,0.8Mm Male Header Pins,0.8mm Pitch Pin Header,SMT 0.8mm Pin Header, THT 0.8mm Pin Header

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com