Speaking of Honda's SUV model, everyone is most familiar with the CR-V from Honda. After the launch of the new model some time ago, it has also been recognized by many consumers, and the overall design is also more youthful. Today we are talking about this Honda SUV, but it has the ability to compete with Highlander, it is the Honda pilot. In fact, there have been rumors that Honda pilots have to deal with localization, and so far it is still late, it may be caused by displacement, but this car is still a very good model.
First of all, from the side, its appearance gives people the feeling that it is very spacious and burly, which can give us a strong sense of security. The overall body line reflects its tough temperament, and the lines below the door panel provide a very good three-dimensional effect. The rear panel uses privacy glass to provide a good privacy for the rear passengers. The large wheels are black in design, which can further reflect its temperament and reveal a more sporty feeling. From this point of view, in fact, its overall body size and Hanlanda and Volkswagen Touran have the potential to compete, just hope that Honda will not let its fans wait too long.
In terms of the tail, its style looks very thick. If you don't look carefully, it's really a bit like the Lexus LX570. The style of the two taillights gives people a very unique feeling. There is a sickle-like feeling. The middle is connected by a decoration. It looks very delicate. The tail line is also very tension, giving a very strong layering. The bumper on the bottom is also wrapped in a nice chrome finish, giving a very luxurious feel. The tail exhaust is a hidden design, probably because its engine is naturally inhaled and looks low-key. In fact, one of the biggest regrets on the side is that it does not use a suspended roof. This is nothing to watch at present. After all, it is a car of such a size.
The style of the front face is even more sharp. The first thing we can see is that its mid-net part is wrapped in a lot of chrome-plated material, giving people a feeling of luxury. The two headlights are used. The design of the integration of the mid-net part is also quite a whole. The style of the LED daytime running lights looks similar to the current Buick family and looks very tensiony. The fog light part below is quite good, and it has a design sense. The air intake below is wrapped in black material, which looks very powerful. The front face always has a good visual impact. Compared with Highlander and Tourang, it is still very characteristic.
In the interior part, the Honda pilot adopted the most avant-garde design style of the Honda family. The four-position steering wheel is covered with multi-function buttons, which makes the whole car look more technical and the size of the large screen on the center console. Very large, integrated with many functions on the top, eliminating a lot of traditional physical buttons, which also reflects Honda's sense of technology. The air conditioning vents on both sides of the large screen are wrapped in silver material, which gives people a very good feeling. The air conditioning control button below is a self-contained area, which looks very obvious and has good functionality. The biggest highlight of the whole car is the use of Honda's latest shifting mechanism and push-button shifting. This is still a good indication of its advantages. After all, Acura has already adopted this method. The biggest advantage of this layout is that the entire front area looks very flat and is very convenient to use.
In terms of seats, this Honda pilot has adopted a very good color scheme. The light color combination has become the best choice for a family car. It has a leather seat with perforated material and the overall comfort is very good. The internal filling is very soft, the large seat is very good for the human body, but the small friend may not be very comfortable, and its backrest is quite powerful. The layout of the seven-seat is 2+2+3. The biggest advantage is that the front passengers are more spacious. In places like North America, it is also very popular among many home consumers. The third row is the seat. The chair design looks a bit compact, but it is actually a three-person seat, which can be seen from the middle headrest. The position of the cup on both sides of the seat provides a lot of convenience for the third row of passengers.
In terms of power, this Honda pilot uses a 3.5L naturally aspirated engine. As a North American SUV, its displacement can still guarantee the daily use of American consumers. Spray technology, with automatic start-stop function and various road modes, can guarantee its safe driving, the transmission part is likely to be equipped with Honda's new 10AT gearbox, and has four-wheel drive and two-wheel drive power. The way for everyone to choose, the biggest concern so far is that we don't know when this car will be listed. At present, domestic consumers are more limited in their choice of large seven-seat SUVs. I hope that this car will be used as soon as possible in the future. Brought into the country to provide you with more choices.
Straight Reamers are used to drill a hole in material with a pilot hole. In order to improve machining efficiency, we usually use the process strategy with a solid carbide drill and straight reamer reduces the processing time and produces a straight hole with tight tolerances and an excellent surface finish.
Advantage:
Unique guidepad geometry allows for excellent roundness and straightness, even in an interrupted cut condition.
Surface roughness is reduced obviously.
Reduced the machining time while maintaining a reliable process.
Features
With 4, 6 or 8 flute
Multi-diameter tool allowing for excellent hole size and concentricity between diameters.
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
+
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
Ceramic End Mills
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtoolss.com