Tracking and communicating the dynamics of semiconductor lighting standards, further improving the construction of semiconductor lighting standard systems, and promoting the introduction of semiconductor lighting standards that are urgently needed by the industry. On March 18, 2008, the Alliance Standardization Coordination Promotion Working Group (hereinafter referred to as the “Working Groupâ€) The second working meeting was held in Changzhou City, Jiangsu Province.
The participating experts first listened to the 2007 work summary report of the working group, and discussed and determined the 2008 work plan. The organization drafted and introduced to the industry the recommended technical specifications for the "Measurement method for integrated LED street lamps". The meeting decided that the 2008 working group will focus on improving the development of semiconductor lighting standard system, promoting the introduction of LED-related standards, building a standardized LED testing platform, and assisting in the regulation of LED industry behavior.
The meeting also discussed the most urgently needed standards for semiconductor lighting. Some experts believe that LED lighting standards currently have three major problems: life testing, energy efficiency, and the adaptability of LED lighting and human health; some experts believe that the standards are mainly three categories: Basic standards, LED standards for general lighting and LED standards for indicating display, the real lack of products, technology and monitoring standards; and experts believe that standards development must keep up with market development, market-oriented, as soon as the industry demand is the most urgent Standard.
The participating experts also believed that it is necessary to fully understand the status quo of domestic standards, and the standardization agencies should do a good job of division of labor, distinguish the technical fields, and pay attention to the seamless connection between upstream and downstream standards. At the same time, the standard system itself must not only reflect differences, but also be unified in the definition of terminology. According to the characteristics of the development of the semiconductor lighting industry, the current situation of the large number of filial piety of domestic semiconductor lighting enterprises is first promoted by the alliance working group, and it is very necessary and meaningful to formulate recommended technical specifications.
The technical director of Hangzhou Yuanfang Optoelectronic Information Co., Ltd. Pan Jiangen gave a detailed introduction to the recommended technical specifications of the "Measurement Method of Integrated LED Street Lamps". The experts at the meeting held a heated discussion and put forward some substantive opinions on some of the terms and measurement methods. And operability of the amendments, and that the technical specifications can recommend trials to the industry. Director He Kaixuan of Xiamen LED Promotion Center said that it will publicize and recommend the implementation of this technical specification in Xiamen and surrounding areas.
At the meeting, Zhao Ying Gaogong introduced the first draft of "Semiconductor Lighting System". The first draft of the system was jointly formulated by the members of the working group in 2007, and the drafts were widely consulted. Experts discussed some of the classifications and names in the system, making the system more scientific and more operational. The participating experts also believe that the standard system construction should be clear about how to learn from each other and avoid confusion.
Finally, the deputy secretary-general of the army made a concluding speech at the meeting. I hope that the standardization bodies can communicate with each other with a more open mind and attitude, and participate in the work of all parties. The working group should absorb more relevant standardization in future work. Institutions join to build a broader communication and exchange and cooperation platform; strengthen the combination of major technological breakthroughs, product development and major applications and semiconductor lighting standardization in the implementation of major projects of the 863 Program; strengthen the work of the working group on the basic standards of universality For the application of products that are still not mature, it is recommended to strengthen the preliminary research by means of technical norms, do a good job in industrial guidance, and lay a good foundation for the long-term development of the industry; increase the popularization of standards testing, and do well in existing standards. Propaganda, timely release and release test data of various new products.
Shi Dingzhen, State Council Counselor, Li Baoshan, Researcher of the High-tech Department of the Ministry of Science and Technology, and Wu Ling, Secretary General of the National Semiconductor Lighting Engineering R&D and Industry Alliance, attended the meeting and encouraged all members of the working group. I hope that the working group will continue to work hard in the future work. Good semiconductor lighting standardization work, we must continue to advance the standardization of semiconductor lighting.
The participating experts first listened to the 2007 work summary report of the working group, and discussed and determined the 2008 work plan. The organization drafted and introduced to the industry the recommended technical specifications for the "Measurement method for integrated LED street lamps". The meeting decided that the 2008 working group will focus on improving the development of semiconductor lighting standard system, promoting the introduction of LED-related standards, building a standardized LED testing platform, and assisting in the regulation of LED industry behavior.
The meeting also discussed the most urgently needed standards for semiconductor lighting. Some experts believe that LED lighting standards currently have three major problems: life testing, energy efficiency, and the adaptability of LED lighting and human health; some experts believe that the standards are mainly three categories: Basic standards, LED standards for general lighting and LED standards for indicating display, the real lack of products, technology and monitoring standards; and experts believe that standards development must keep up with market development, market-oriented, as soon as the industry demand is the most urgent Standard.
The participating experts also believed that it is necessary to fully understand the status quo of domestic standards, and the standardization agencies should do a good job of division of labor, distinguish the technical fields, and pay attention to the seamless connection between upstream and downstream standards. At the same time, the standard system itself must not only reflect differences, but also be unified in the definition of terminology. According to the characteristics of the development of the semiconductor lighting industry, the current situation of the large number of filial piety of domestic semiconductor lighting enterprises is first promoted by the alliance working group, and it is very necessary and meaningful to formulate recommended technical specifications.
The technical director of Hangzhou Yuanfang Optoelectronic Information Co., Ltd. Pan Jiangen gave a detailed introduction to the recommended technical specifications of the "Measurement Method of Integrated LED Street Lamps". The experts at the meeting held a heated discussion and put forward some substantive opinions on some of the terms and measurement methods. And operability of the amendments, and that the technical specifications can recommend trials to the industry. Director He Kaixuan of Xiamen LED Promotion Center said that it will publicize and recommend the implementation of this technical specification in Xiamen and surrounding areas.
At the meeting, Zhao Ying Gaogong introduced the first draft of "Semiconductor Lighting System". The first draft of the system was jointly formulated by the members of the working group in 2007, and the drafts were widely consulted. Experts discussed some of the classifications and names in the system, making the system more scientific and more operational. The participating experts also believe that the standard system construction should be clear about how to learn from each other and avoid confusion.
Finally, the deputy secretary-general of the army made a concluding speech at the meeting. I hope that the standardization bodies can communicate with each other with a more open mind and attitude, and participate in the work of all parties. The working group should absorb more relevant standardization in future work. Institutions join to build a broader communication and exchange and cooperation platform; strengthen the combination of major technological breakthroughs, product development and major applications and semiconductor lighting standardization in the implementation of major projects of the 863 Program; strengthen the work of the working group on the basic standards of universality For the application of products that are still not mature, it is recommended to strengthen the preliminary research by means of technical norms, do a good job in industrial guidance, and lay a good foundation for the long-term development of the industry; increase the popularization of standards testing, and do well in existing standards. Propaganda, timely release and release test data of various new products.
Shi Dingzhen, State Council Counselor, Li Baoshan, Researcher of the High-tech Department of the Ministry of Science and Technology, and Wu Ling, Secretary General of the National Semiconductor Lighting Engineering R&D and Industry Alliance, attended the meeting and encouraged all members of the working group. I hope that the working group will continue to work hard in the future work. Good semiconductor lighting standardization work, we must continue to advance the standardization of semiconductor lighting.
This is the most competitive 15.6 inch Budget Business Laptop, comes with 2022 intel latest celeron cpu-N5095, J4125, etc . Of course, other Budget Working Laptop are also available.
For example, 15.6 inch i5 4th Budget Workstation Laptop for your mid-level task, 14 inch i5 10th Budget Laptop For 3d Modeling, 15.6 inch i7 5th Budget Laptop For Photoshop, or 15.6 inch i7 10th budget laptop for work, etc. Of course, there are other type device, like Android Tablet, 2 In 1 Laptop , Mini PC , All In One PC.
A thin, portable, light-performance laptop may be the ideal tool when people choose a business laptop, therefore just ask yourself 1.what jobs you mainly need this device to do, then choose the cpu and storage necessary, 2.if need fingerprint or backlight; 3. prefer type C charging? Or traditional DC is ok? 4. Does RJ45 webcam is important for you? 5. how many hours you need the laptop to work when do your main jobs?
6.Camera position, prefer on the middle of screen up? or is ok on the bottom of screen?
Budget Business Laptop,Budget Working Laptop,Budget Workstation Laptop,Budget Laptop For 3d Modeling,Budget Laptop For Photoshop
Henan Shuyi Electronics Co., Ltd. , https://www.hnsylabtop.com