Smart bracelets, as a more popular form of products in the past two years, have attracted more and more attention, and at the same time, some changes have taken place in the electronics market.
This article refers to the address: http://
A smart wristband usually consists of a radio frequency circuit unit, a clock circuit unit, a memory circuit unit, a sensor circuit unit, and a master MCU unit, and the circuit PCB is usually concentrated in a small range for single-sided or double-sided patches. The board is mainly 4 or 6 layers.
Since the versatility is concentrated on a small PCB board, we have to pay special attention to the layout and routing of the bracelet. Now, some considerations are summarized for reference.
PCB layout of each part of the PCB, pay attention to trace protection
As can be seen from the PCB board above, the various parts of the smart bracelet (different color box marks) have a good partition: since the smart bracelet is a collection of digital circuit components, as long as the circuit design is done With the matching resistor and capacitor distribution, the circuit module with certain functions can be completed, which makes the circuit design more concise and easy to find.
Although some sensor circuit units use analog circuit technology for data acquisition, once the module is designed as a module, data communication and information transfer can be completed through the corresponding connection interface.
In the layout of the circuit module, on the one hand, it is necessary to pay attention to the clock circuit and the crystal oscillator circuit to reach the target discipline through the shortest path. On the other hand, when the clock is routed, care should be taken to avoid the data line to prevent the interference from affecting the stability of the system.
When routing, it is necessary to protect the critical traces, such as the clock generation circuit, the crystal oscillator circuit, etc., whether to carry out copper protection, whether to carry out ring protection, etc., generally in the design will be protected, for the crystal part is required to dig copper .
Handling good RF circuits in PCB design
The smart bracelet needs to be linked with the mobile phone when it is used. Therefore, the radio frequency part is a key part. In this part of the design, special care must be taken. Nowadays, the smart bracelets on the market are nothing more than wireless data transmission based on Bluetooth, so the focus is on the processing of Bluetooth radios.
If the smart bracelet is only used for data transmission without the need to transmit sound and music, then low-power Bluetooth is the best choice. At design time, the shape of the Bluetooth antenna, the antenna layout, the smart bracelet shell material, etc. all affect the intelligence. An important factor in the performance of the bracelet. An excellent RF antenna engineer is particularly important in the smart bracelet PCB design process.
Do ESD protection design
Different countries and regions have different standards for different products or the same product ESD requirements. In order to pass the relevant tests, ESD protection design should be carried out at the time of design. After the design is completed, ESD testing should be carried out to ensure the passing of products. Adapt to electronic testing in the local market.
Reserved system upgrade interface
Whether the upgrade of a smart bracelet is convenient or not is very important for users or smart fans. If a product is upgraded at the appropriate time (probably the previous hardware design to some functions and not catch up with the market software, it may also be a bug in some software), which means the product is still non-stop. This is a good psychological compensation for the user during the development process. There are usually two ways to upgrade a smart bracelet software: via USB interface and wireless push. As for which method to use, it needs to be determined in the early planning and hardware and software planning.
The Screen Protector has a self-healing technology that can automatically eliminate small scratches on the Protective Film within 24 hours. Significantly reduce dust, oil stains and fingerprint smudges, anti-scratch.
The Screen Protection Film is very suitable for curved or flat screens. The Soft Hydrogel Film perfectly matches the contour of your device. Will not affect any functions of the phone.
The Ultra-Thin Protective Film with a thickness of only 0.14mm uses 100% touch screen adaptive screen touch screen technology, complete touch screen response, high-tech technology makes the screen touch to achieve zero delay, ultra-thin material brings you "realism".
The Protection Film has excellent clarity and incredible toughness, providing a high level of clarity and a glass-like surface, highlighting the sharpness of the most advanced smartphone display images and bright colors.
If you want to know more about Self Repair Screen Protector products, please click the product details to view the parameters, models, pictures, prices and other information about Self Repair Screen Protector.
Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about the Self Repair Screen Protector!
Self-healing Protective Film, Self-repairing Screen Protector,Self-healing Screen Protector, Self-Healing Hydrogel Film,Hydrogel Film Screen Protector
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtscreenprotector.com