1 electromagnetic flowmeter is a volume flow measurement instrument, in the measurement process, it is not measured by the media temperature, viscosity, density in the conductivity (in a certain range). Therefore, after the electromagnetic flow meter is calibrated by water, it can be used to measure the flow of other conductive liquids.
2. The output of the electromagnetic flow meter is only proportional to the average flow velocity of the medium being measured, but is independent of the flow state (laminar flow or turbulent flow) under a symmetrical distribution. Therefore, the range of the electromagnetic flowmeter is very wide, with a measuring range of up to 100:1, and some even reach a flowable range of 1000:1.
3. The sensor structure of the electromagnetic flowmeter is simple, there are no moving parts in the measuring tube, and there are no throttling parts that impede the flow of fluid. Therefore, when the fluid passes through the flow meter, it does not cause any additional pressure loss, and is one of the lowest energy consumption flow meters in the flow meter.
4. It can measure the flow rate of fouling medium, corrosive medium and suspension liquid-solid two-phase flow. This is due to the fact that there are no obstructed flow components inside the measuring tube of the electromagnetic flowmeter, and only the measuring tube lining and electrodes are in contact with the fluid to be measured, and the material can be selected according to the nature of the fluid to be measured. For example, with polytrifluoroethylene or PTFE as the inner lining, it can measure various corrosive media such as acids, alkalis, and salts; wear-resistant rubber as the inner lining is particularly suitable for measuring wear with solid particles. Larger slurry, cement slurry, etc. Liquid-solid two-phase flow, and various suspended liquids with fiber liquids and pulps.
Automotive Connector,Copper Busbar,Hdmi Connector,Deutsch Connector
Dongguan Andu Electronic Co., Ltd. , https://www.autoido.com