Before installing the Qiao Sibo V3+ on the Internet, she was thrown into a disgrace and placed on the table. One day on the Internet, I saw the MAC mini chassis, moving the idea of ​​DIY installed.
Gathered a variety of information, found the compatible chassis accessories.
Because only the Internet, playing chess. Therefore, the selected configuration is sufficient and the calorific value is low.
CPU is Intel G1620 2.7GHz This is the old machine that was eliminated.
Micron 4G 1600 low-voltage memory purchased early this year in Yi Xun, now Yi Xun actually does not sell memory.
The hard disk selected was msata's SSD, and my friend's nuc used it. Due to incompatibility, the low-cost processing was given to me. SSDs for the internet machine will be much more comfortable. Now that there are no SSD machines, I'm not used to them.
Radiator scouring for a long time, selected this. Purchased in Taobao is more expensive than an ordinary desktop radiator.
The motherboard should be on a certain brand of machine, the chipset is H61. Amoy's second-hand, fineness quite good, with mSATA solid-state interface, network card interface, HDMI interface, USB3.0 interface. The value for money is really great value.
Chassis MAC mini bare one apple logo, more concise.
Put into the chassis.
Cover the bottom cover.
After that, it was lightly loaded with the system balabala. The process was relatively simple and it was not filmed. Power Supply Using 18.5V 6.5A Power Adapter
The overall effect is shown in the figure.
Later, the friend gave me an i5 2300 and a 4G notebook memory for me, with 350 recovered, value. Simply installed, replaced the G1620.
Memory is a beautiful light, a Samsung.
The configuration and temperature are shown in the figure, probably because it is a branded motherboard. Master Lu detected that it was ATECPC's H61. The motherboard should be elite. It can be seen by looking at the kernel.
In fact, it took a thousand years to finish, and it was a good deal as a net machine. And the appearance is more fashionable. It should be noted that the internal space of the chassis is small and the whole is an aluminum shell. The chassis may be a little hot. If the indoor temperature is high, it is recommended to put a small fan next to it.
Dongguan Metalwork Technology Co., LTD. , http://www.diecast-pro.com