RJ45 Ethernet Extension Cable Panel Mount

RJ45 Ethernet Extension Cable Panel Mount

Spcifications:

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Cubieboard, Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.
The jack half has two mounting 'ears' with M3 screws installed, 1.125" inch / 28.5mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire cable is 9" long.

 
Detailed Features:
Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
24 AWG wires
11" long / 28 cm
Two M3 mounting screws, 1.125" / 28.5mm apart
Plastic "boot" at Ethernet end is 20.91mm tall x 38.47mm wide (22.81mm where it is smaller behind the mounting flange) x 28.21mm deep


Transportation:
 
All available shipping ways could be applied, by courier, air or sea.
Your appointed forwarders or our own forwarders all could be used for shipment.
Full-way tracking the cargos for you before the goods arrive.
 
Globe Market:
 
Depending on advanced technology and knight service, we establish a good and diligent team and keep nice business relationship with a large amount of worthy clients in global market. We are prepared to provide the best products to clients at competitive price. In addition to control of cost and quality, our stipulated lead-time, variety of designs, capability of product development and flexibility of service bring convenience and value added services to the clients.
 
Contract us:
We highly appreciate your any enquiry by email, fax or instant message.
We will reply your email or fax within 12 hours.
Please fell free to call us at any time if you have any questions.
 
FAQ:

1. Do you provide samples?
Yes, Two samples for free .Dear ,freight fee charged by your side.
 
 
2. What is your minimum order quantity?
The MOQ is 100 pcs , but the quantity for OEM should be 2000 pieces or more.
 
 
3. What about your production capacity?
We can produce 30k boxes or 10,0000 pieces a month.
 
 
4. Where is your company?
Our company and factory all are in Shenzhen.
 
5. Can you make OEM?
Of course.

6. Welcome to visit our website:
www.sznanming.cn
 





  RJ45 Ethernet Extension Cable Panel Mount

Spcifications:

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Cubieboard, Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.
The jack half has two mounting 'ears' with M3 screws installed, 1.125" inch / 28.5mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire cable is 9" long.

 
Detailed Features:
Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
24 AWG wires
11" long / 28 cm
Two M3 mounting screws, 1.125" / 28.5mm apart
Plastic "boot" at Ethernet end is 20.91mm tall x 38.47mm wide (22.81mm where it is smaller behind the mounting flange) x 28.21mm deep


Transportation:
 
All available shipping ways could be applied, by courier, air or sea.
Your appointed forwarders or our own forwarders all could be used for shipment.
Full-way tracking the cargos for you before the goods arrive.
 
Globe Market:
 
Depending on advanced technology and knight service, we establish a good and diligent team and keep nice business relationship with a large amount of worthy clients in global market. We are prepared to provide the best products to clients at competitive price. In addition to control of cost and quality, our stipulated lead-time, variety of designs, capability of product development and flexibility of service bring convenience and value added services to the clients.
 
Contract us:
We highly appreciate your any enquiry by email, fax or instant message.
We will reply your email or fax within 12 hours.
Please fell free to call us at any time if you have any questions.
 
FAQ:

1. Do you provide samples?
Yes, Two samples for free .Dear ,freight fee charged by your side.
 
 
2. What is your minimum order quantity?
The MOQ is 100 pcs , but the quantity for OEM should be 2000 pieces or more.
 
 
3. What about your production capacity?
We can produce 30k boxes or 10,0000 pieces a month.
 
 
4. Where is your company?
Our company and factory all are in Shenzhen.
 
5. Can you make OEM?
Of course.

6. Welcome to visit our website:
www.sznanming.cn
 





 

Component Mounting And Soldering.The final step is to mount and solder the components. Both THT and SMT components are placed on the PCB by machines. THT components are most often soldered in an automated process called 'Wave Soldering'. This enables all components to be soldered simultaneously. Their legs are first cut near the board and slightly bent over to keep the component in place. The PCB is then moved over a wave of liquid flux, such that the bottom side strikes the flux. This removes any oxide from the metal surfaces. After heating the PCB it is similarly moved over a wave of melted solder. The solder attaches to the solder pads and component legs, and the soldering is complete.

Component Mounting

Component Mounting,Custom Component Mounting,Metal Component Mounting,Mount Bracket Component

Orilind Limited Company , http://www.orilind.com