Said that the market to sell 399 routers, one of the most famous, I believe that many old drivers will invariably think of that station did not arrive at the K2. If K2 really sells 399, of course it's a joke. We don't discuss specific brand marketing here. To be honest, if you want to value your friends to recommend a 300-400 yuan price router, who is your choice?
The front line of the landlord's renting house promotes telecommunication broadband. If the number of mobile phones plus 100G + 1G + 300 minutes + iTV is only 85 per month, it wouldn't be anyone. Because it is renting, so has been using free æ’¸ 1 K1 make do, after brushing the ASUS firmware is really very stable, the entire July has been in the air-conditioned living room with no grudges, about eight standby devices, has been very stable, never dropped.
The biggest regret of K1 is that there is no USB, and the landlord did not change the technology of hard USB. If you can have a USB hard drive for simple data sharing and sharing of course is excellent, coupled with K1 with a hundred trillion broadband always feel a bit difficult, picked up the idea of ​​picking up.
Because of the limited budget, 68U, R7K and other one-step choices can only be seen, but the router within 400 is only these things. . . Your old driver must be disrespectful
Just when I wondered if I had received a R6300V2 refurbished goods, I saw this state:
Simply paste the hardware parameters:
The processor is Broadcom Broadcom BCM4708 (Cortex-A9 dual-core 800Mhz);
5G uses Broadcom Broadcom BCM4360, speed 1300Mbps;
2.4G uses Broadcom Broadcom BCM4331, speed 450Mbps;
256RAM+128ROM.
The configuration of the complete machine is an external three-antenna replica of the 6300V2, and the performance is also on par with the 68U. This product is perfectly in line with my needs, the price of 499-20 is also a new low price, although the small budget, but also worth it! Before placing an order, I glanced at the comments and found that a big brother pointed us the direction! Jiangsu can do 399's price is almost no one! Still hesitant? Buy buy buy!
- - - - - - - - - - - - - - - - - Jingdong Small Delivery Line - - - - - - - - - - - - - - - - -
insert! Open the package!
When I pulled out the R6400, I was really shocked by his size. . Attach a contrast with one plus three.
And compared to the soon to be retired K1
The surface of the R6400 is a mirror + wave point, which is different from the high-end series such as the R7K. See the logo for details.
The R6400 uses a USB 3.0 pre-installed solution and plugs it into a USB flash drive. .
The back interface is also very conventional, and 4 Gigabit Lan ports are standard on this level. It is worth mentioning that its USB 2.0 support for printer sharing, as well as the Power button design is also very easy to use.
The R6400's antenna can't be disassembled. Personally think that compared with its huge size, the antenna length is a little short and the proportion is a bit uncoordinated.
Finally, a random item was affixed: 12V 2.5A adapters and Ultra-Five lines are also considered to be the side of the product's body position.
- - - - - - - - - - - - - - - - - Simple Measurement Line - - - - - - - - - - - - - - - - - -
Originally thought that I was sending and receiving in the station, and later found out that I already had a big step with my brother and the article was very detailed. In contrast, my drying order was so shallow. . Paste a link here, there is a need for value-friends can learn in depth
Because there is a need to use the $$, so the router hand brushed Xiao Bao's official reform firmware, the overall and official firmware is no different, the interface is as follows, and the official firmware is the most obvious difference, the tip of the eye will naturally find:
The conventional setup will not be repeated. The official firmware of the netware does not have any features.
Test environment: BCM94360 1750M wireless network card, install ASUS PCE-68 driver, and external PCE-68 external antenna, the figure is the goods. . The PC and the route were separated by a non-load bearing wall during the test.
The first is the signal comparison with K1 (above 6400, lower K1)
Although the 6400 only had three antennas, the 5G signal strength easily lost -51 to the K1's -60 position. Observed value friends even find that the R6400's 5G signal is actually stronger than its own 2.4G signal. .
Connection speed comparison (upper 6400, lower K1)
The advantage of 6400 born bandwidth + signal makes WiFi bandwidth run at 585Mbps, compared with 351Mbps for K1.
PC to route USB3.0 port upload & download test:
This test is an extremely rigorous random test. During the test, the R6400 carries six devices that are normally connected to the Internet. Therefore, the bandwidth rate is extremely vulnerable. The test file is a 912MB Office 2013 image file, and the USB flash drive uses the CZ80 16GB.
The summary table is as follows:
I don't have high-end NAS devices at hand, so the tests are very simple. 3.0 and 2.0 do not make any difference in this device. It can be seen as a test error. According to evaluations elsewhere, the USB performance of the 6400 is indeed lower than its own brother R7000. It is believed that this is the reason for firmware optimization. In the near future, it is planned to play with a DIY black skirt to fully play the function of the R6400.
- - - - - - - - - - - - - - - - - Supplementary dividing line - - - - - - - - - - - - - - - - -
Yesterday, I rushed to write a draft and rested. Today, I get home from work. I can't even connect to wifi, and my mobile phone is very hard. In addition, I had met with an inexplicable crash before using the official change firmware, which caused me to worry about the stability of the official reform firmware. . Although I want to believe that Xiaobao's strength (the 68U used by parents at home has always been used by Xiaobao's Meilin, super stable and easy to use), the relatively small minority of the 6400 is doomed to make its firmware development not perfect. After pondering the decision to brush the official firmware.
The latest firmware version that the official website can find is: R6400-V1.0.1.6_1.0.4.chk , but after the brush is completed, the background management interface will still prompt the updated version. I then click on the automatic upgrade, and repeated toss cannot be upgraded successfully. . After some searching, only a newer version of the firmware was found on the US official website of NETGEAR. The compiler was compiled on March 9, 2016 at R6400-V1.0.1.12_1.0.11.chk . In order to facilitate the value of your friends, you posted Baidu. Cloud Sharing: http://pan.baidu.com/s/1c1304BQ
Written at the end:
As a 399 route, it can have the flagship configuration under the MIMO1.0 specification. For most users, its performance and stability are very redundant, and it is the first choice for stable home WiFi. Covering the demand, 6400 is more relaxed and more satisfying. The standard four Gigabit LAN ports have also laid the foundation for building NAS and other family Gigabit intranets. However, the R6400 also has some minor regrets:
The firmware is relatively simple and the basic functions are sufficient. ReadyCloud (implements a simple home NAS function) + NetGear DDNS (Dynamic Domain Name Service) + NetGear Downloader (net download offline) also implements some simple cloud functions, but compared to Merlin firmware under Thunder offline, Aria2 and other artifacts, network The pieces are still far from the bottom. Hope to have Merlin adapt soon
The heat is amazing. I have ordered a USB fan ready to heat it.
There is actually howling. . . Today, when I got home to open the door, I heard the sound of squeaking. The timbre and rhythm of the melody sounded almost in tune with my wailing 970. . . After some searching, it was found that the noise from 6400 was slightly silent. .
Thank you for watching
Easy Electronic Technology Co.,Ltd , https://www.pcelectronicgroup.com