When the fan drive system adopts the single-supply power supply control mode, the power level of the switching power supply output will increase, the performance characteristics of the components will be improved, and the selection of the high-frequency transformer needs to be reconsidered. Therefore, there are many factors that need to be considered when adopting this control method.
Since the dual fan is used as the load (the original load is a single fan), the load demand is increased, and the output number of the high-frequency transformer needs to be increased. To meet the needs of the single-power dual-fan control work, the high-frequency transformer needs to increase the number of output channels; If the increase leads to an increase in current, the wire diameter of the primary winding of the high-frequency transformer needs to be increased accordingly, and the high-frequency transformer needs to be redesigned.
The more common switching power supply chip is TNY278. Due to the use of dual fans as the load, the parameters of the key components of the switching power supply need to be adjusted. Due to the increase in load, the number of output channels of the high-frequency transformer needs to be increased. At the same time, the leakage inductance will increase accordingly, and the spike voltage Vspike caused by the primary leakage inductance of the transformer will also increase accordingly.
The Vspike caused by the leakage inductance of the transformer can be absorbed by the peripheral circuit, so that the waveform peak of Vds does not exceed the withstand voltage of the switch tube under the condition of maximum AC input voltage and maximum load, but the basic premise is that the power chip should be selected higher. Pressure rating.
After the switch is turned on, the drain-source voltage will drop to zero instantaneously. At this time, the drain current starts to rise. When the duty ratio reaches the maximum and the current also reaches the maximum value, the switch is turned off and the current instantaneously drops to zero. . The first peak current is the noise of the switching tube action and will not affect normal use.
Breze stiik mega changed the game of the Disposable Vape industry, it features with the function of bottom airflow adjustable, which will make it possible that vaper can enjoy the different vaping experience, especially the airflow.
It got a bigger and wider body and bigger battery capacity, and also more liquid capacity than most of the vapes in the market, it`s one of the most popular disposable vapes in our white label line.
This Breze Stiik Mega encapsulated with a 1100mAh battery, it carries a 5% nicotine salt strength, and it produces approximately 2200 puffs per piece, holding a 7.0ml capacity high-grade pure taste nicotine salt juice.
This is a breze stiik mega, a perfect alternative of smoking a real cigarette. And it`s portable, convenient to use, because it`s not only light but also constructed in a way to make it pocket – friendly for your day-to-day travels. What`s more, the most amazing part of it is the variety of fantastic flavors choices. As a result, this pod produces pure strong, and intoxicating vapor and flavors that you will fall in love with it once you have your first puff.
Specs & Features:
Refilled Flavor: All Flavors Available
Nicotine Salt Strength: 5% / 50mg
Disposable, non-rechargeable & non-refillable
All-in-one system
Draw activated firing mechanism
Juice Capacity:7.0ml
Battery Capacity: 1100mAh
Approx 2200 puffs per device
Approximately equivalent to 150 real cigarettes per vape
Color: Same as pictures
Reference Resistance: 1.6 ohm
Product Name: Breze Stiik Mega Disposable Vape
Custom Disposable Vape Pen,Breze Stiik vape,Breze Stiik disposable
Hongkong Onice Limited , https://www.ousibangvape.com