Thermal deformation Vicat softening point tester
MTSH-9 type
Tube thermal deformation Vicat softening point tester
one,
Thermal deformation Vicat softening point tester
Overview
This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. The LED digital tube display shows that the test results are straightforward. It adopts single-chip control, PID phase-modulated output, real-time key storage, query test result, has upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature.
Standard: the standard requirements GB / T 1633, GB / T 8802, GB / T 1634, ISO 2507, ISO 75, ISO 306, ASTM D 1525, ASTM D 648 and the like.
two,
Thermal deformation Vicat softening point tester
Main performance indicators
1, temperature control range: room temperature ~ 300 ° C
2, heating rate: 120 ° C / h, 50 ° C / h
3, the maximum temperature error: ± 0.5 ° C
4, temperature measurement points: 1
5, the number of sample racks: 3
6, deformation measurement gage: digital dial indicator
7, deformation measurement range: 0 ~ 1.1mm
8, sample support span: 64mm, 100mm
9, the maximum deformation measurement error: 0.01mm
10, heating medium: methyl silicone oil (customer-supplied)
11. Cooling method: natural cooling above 150 °C, water cooling below 150 °C or natural cooling
12, the required space: 0.5m before and after, 1.5m left and right
13, power: 250VA 220VAC 50HZ
three,
Thermal deformation Vicat softening point tester
installation
1. Open the packing box, take out the equipment, and check all the parts according to the packing list.
2. The main unit should be placed on a flat, sturdy ground, fixed and reliably grounded.
3. Inject methyl silicone oil into the oil tank and check the oil drain nozzle and other parts for oil leakage.
4. The added methyl silicone oil is about 9 liters, that is, the oil surface is parallel to the lower plane of the beam in the sample holder.
5. Place the three sample racks on the tray and check whether the load rod moves up and down smoothly.
6. Connect the connection between the host and the temperature control box.
7. Connect the water inlet of the cooling water pipe with the hose and connect the water pipe to the sewer.
8. Check that each connection is correct. Turn on the power of the main unit and the motor starts to run.
9. Install the dial gauge on the dial gauge and fix it.
Thermal deformation Vicat softening point tester display chart: 
Genki Ippai 1.0 uses high-tech temperature control, food grade pod and high-quality material device. We also upgrade to type-C interface for charging faster. We have developed various flavors for Genki Ippai Pod Systems. Up to 11 flavors provide consumers with more choices. What's more, you can use other brand`s vape pen with our vape pod.
We offer low price, high quality Disposable E-Cigarette Vape Pen,Electronic Cigarettes Empty Vape Pen, E-cigarette Cartridge,Disposable Vape,E-cigarette Accessories,Disposable Vape Pen,Disposable Pod device,Vape Pods to all over the world.
GenkiIppai Pods 1.0,Pod Systems Vape And Smoke,Vape Pod System Device,Pod System Vape Kit,Pod System Mini Vape Pod
ZGAR INTERNATIONAL TRADING CO., LTD. , https://www.zgarecigarette.com