Multi-function direct reading calcium measuring instrument use steps - Database & Sql Blog Articles

product name

] SG

-

6

,

8

Multifunctional direct reading calcium measuring instrument

[

Product introduction

]

It can measure both the lime dose and the cement dose and the effective calcium oxide content in the lime.

Instructions

1

) function selection. Used to select different measurement functions, respectively

mV

Potentiometer,

C1

Lime dosage,

C2

Cement dosage,

CaO

Switch between. The function selection button unlocks the data.

2

)calibration. Press the calibration button

3

In seconds, the instrument enters the calibration state. In the calibration state, tap the calibration button to switch the function items that need to be calibrated. At this time, write the calibration point

1

, write calibration points

2

effective.

3

) Automatic measurement. After the automatic measurement is pressed, the agitation is automatically started.

60

After a second, the stirring stops, and then

20

In seconds, the display data lock no longer changes. In the data lock state, press the function selection key to switch the function to unlock.

4

) Cleared. The current voltage is cleared, this function is only in

mV

Under the potentiometer, it is used to clear the current voltage zero point and is used to automatically display the difference between the two measured potentials.

5

)print. Used to print the current test results. Make sure that the printer power, data cable is properly connected before operation, and that the printer is properly installed with the paper and ribbon installed and online.

6

)start up

/

stop. Start and stop the stirring motor.

7

Speed ​​control. Mixing motor speed control, can be

3

Select back and forth in the file speed.

8

)power supply. Instrument power switch